1-(Chloromethyl)-2-vinylbenzene — also known as o-vinylbenzyl chloride (o-VBC), 2-chloromethylstyrene, or ortho-chloromethylstyrene (CAS 22570-84-9) — is a bifunctional aromatic monomer that combines a polymerizable vinyl group with a highly reactive chloromethyl (benzylic chloride) group on adjacent ring positions. This "dual reactivity" makes it a sought-after specialty intermediate for negative photoresists, ion-exchange membranes, functional polymers, and fine-chemical synthesis. This guide consolidates its identification data, physicochemical properties, preparation routes, industrial applications, and the storage and safety practices that procurement and R&D teams should verify before ordering.
1. Product Identification at a Glance
|
Parameter |
Value |
|
CAS Registry Number |
22570-84-9 |
|
IUPAC Name |
1-(Chloromethyl)-2-ethenylbenzene |
|
Common Synonyms |
o-Vinylbenzyl chloride; 2-vinylbenzyl chloride; 2-chloromethylstyrene; 2-(chloromethyl)styrene; (2-vinylphenyl)methyl chloride; NSC 403119 |
|
Molecular Formula |
C9H9Cl |
|
Molecular Weight |
152.62 g/mol |
|
SMILES |
C=CC1=CC=CC=C1CCl |
|
InChIKey |
KKLSEIIDJBCSRK-UHFFFAOYSA-N |
|
EINECS Number |
245-092-5 |
|
MDL Number |
MFCD19231990 |
|
PubChem CID |
89757 |
2. Chemical Structure and Dual Reactivity
The defining feature of 1-(chloromethyl)-2-vinylbenzene is the ortho relationship between its two functional groups: the vinyl group (C1) and the chloromethyl substituent (C2) sit on adjacent positions of the benzene ring. Each group participates in an entirely different reaction family:
l Vinyl group — polymerization & addition: The styrenic double bond undergoes free-radical homopolymerization and copolymerization with styrene, divinylbenzene, and acrylates. It is sensitive to light and heat, which is why the neat compound self-polymerizes without stabilization.
l Chloromethyl group — nucleophilic substitution: The benzylic carbon is strongly electrophilic (activated by the ring and further by the chlorine inductive effect), reacting readily with amines, alcohols, phenols, and thiols — including quaternization to benzylammonium groups. It slowly hydrolyzes in moist air, releasing HCl.
l Sequential, orthogonal chemistry: Because the two groups react under different conditions, chemists can first build a polymer backbone through the vinyl group, then post-functionalize the pendant chloromethyl groups with amines, sulfonates, or other nucleophiles. This stepwise strategy is the foundation of functional resin synthesis.
|
Practical insight: Of the three vinylbenzyl chloride isomers (ortho, meta, para), the ortho isomer carries the greatest steric hindrance. This changes copolymerization kinetics and polymer microstructure measurably — a documented effect in lithographic resist research (Griffiths et al., 1989). If your application is sensitive to isomer composition, always request an isomer-specific certificate of analysis. |
3. Physicochemical Properties
|
Property |
Value / Description |
|
Appearance |
Colorless to pale yellow liquid, pungent odor |
|
Density (20 °C) |
1.066 g/cm³ |
|
Boiling Point |
223.4 °C at 760 mmHg |
|
Flash Point |
87 °C |
|
Vapor Pressure (25 °C) |
≈0.144 mmHg |
|
Refractive Index (nD²⁰) |
≈1.570 |
|
LogP |
≈3.1–3.3 (highly lipophilic, practically insoluble in water) |
|
Solubility |
Fully miscible with toluene, dichloromethane, ethyl acetate, DMF, THF |
|
Stabilizer (as supplied) |
Typically 50–300 ppm TBC (tert-butylcatechol) |
Values are compiled from supplier technical data and chemical databases; predicted values are marked in original sources. Always confirm the batch-specific values against the CoA for critical applications.
4. Synthesis Routes
Because industrial chloromethylstyrene is produced mainly as meta/para mixtures, the pure ortho isomer is generally prepared on a specialty basis. Two well-documented laboratory routes dominate the literature:
4.1 From 2-vinylbenzyl alcohol (most common lab route)
(2-Vinylphenyl)methanol is converted to the chloride with a chlorinating agent such as thionyl chloride (SOCl₂) or methanesulfonyl chloride / chloride displacement in dichloromethane at low to ambient temperature. Literature yields range from roughly 60% to 83% depending on conditions; the product is a colorless oil that can be used directly in subsequent steps (e.g., patent procedures reported in US2017/37038 and peer-reviewed work in Chemistry and European Journal of Organic Chemistry).
4.2 From o-methylstyrene via side-chain chlorination
2-Methylstyrene undergoes controlled benzylic radical chlorination with N-chlorosuccinimide (NCS) under UV irradiation, followed by vacuum rectification to ≥98% purity. Temperature and light must be strictly controlled to suppress polymerization of the vinyl group and over-chlorination.
|
Key synthesis caveat: Both routes must be run under conditions that prevent vinyl polymerization — low temperature, exclusion of radical initiators, and inhibitor dosing during workup and distillation. |
5. Industrial and R&D Applications
5.1 Negative-tone photoresists and microelectronics
Chloromethylstyrene copolymers are a classic platform for negative electron-beam and deep-UV resists: the chloromethyl group provides crosslinking sites for high-contrast, low-swell imaging, while copolymer composition tunes sensitivity and dry-etch resistance. Isomer positional effects on lithographic performance were systematically studied as early as 1989 (Griffiths et al., Makromol. Chem., Macromol. Symp.). Today, high-purity o-isomer material is specified for advanced packaging dielectric materials and e-beam resist development, where electronic-grade metal impurity control (down to <20 ppb by custom specification) matters.
5.2 Ion-exchange membranes and ultrapure water resins
Post-polymerization amination of chloromethylated polystyrene yields anion-exchange sites. o-VBC-based copolymers are used to build homogeneous ion-exchange membranes, electrodialysis membranes, ultrapure-water polishing resins, and chelating resins for metal capture. The controlled placement of reactive sites translates into tunable ion-exchange capacity and transport properties.
5.3 Functional polymers, surface-active monomers, and hydrogels
Because the chloromethyl handle survives polymerization intact, it is ideal for "post-modification" polymer chemistry: grafting amines, dyes, biomolecules, or phase-transfer groups onto a preformed backbone. Documented research uses include surface-active monomers (Chaudhury et al., SpringerBriefs in Materials, 2014), amphiphilic hydrogels with hydrophobic-chain-length-controlled swelling (Alam et al., Colloid and Polymer Science, 2025), and PMMA macromer synthesis via o-vinylbenzylmagnesium chloride intermediates (Polymer Bulletin, 1988).
5.4 Pharmaceutical and agrochemical intermediates
In fine-chemistry synthesis, the benzylic chloride is a reliable alkylating building block. Published routes employ it to install o-vinylbenzyl groups onto nitrogen (e.g., N-(o-vinylbenzyl)amine ether chemistry, J. Org. Chem.) and to prepare conformationally constrained scaffolds such as α2-antagonist bicyclo[3.1.0]hexane precursors. The vinyl group additionally opens ring-forming metathesis and cycloaddition strategies.
5.5 Coatings, adhesives, and crosslinkers
As a difunctional monomer it introduces latent crosslinking sites into styrenic coatings and adhesives; subsequent nucleophilic substitution or quaternization cures the film, improving hardness, chemical resistance, and adhesion.
6. Quality Specification and Analytical Control
Typical commercial specification (verify per supplier grade):
|
Item |
Typical Specification |
Method |
|
Appearance |
Colorless to pale yellow liquid |
Visual |
|
Identity |
Conforms to structure |
IR / GC-MS |
|
Purity (main component) |
≥97.0–98.0% (isomer basis) |
GC (area %) |
|
Water content |
≤0.5% |
Karl Fischer |
|
Isomer composition |
Ortho ≥97% (or per agreement) |
GC |
|
Inhibitor (TBC) |
50–300 ppm (declared) |
Titration / HPLC |
For electronic-grade use, request batch data on metal impurities (ICP-MS), residual solvents, and peroxide value. A full Certificate of Analysis — plus SDS and, where applicable, REACH/transport documentation — should accompany every shipment.
7. Storage, Stability, and Shelf Life
l Keep it cool and dark. Recommended storage is commonly 2–9 °C (cold-chain), in a tightly closed, light-protected container. Heat and UV light accelerate self-polymerization.
l Do not remove the inhibitor. TBC requires traces of dissolved oxygen to work: never store the material under a fully inert, oxygen-free atmosphere, and never distill to dryness without re-inhibiting the receiver.
l Moisture control. The benzylic chloride hydrolyzes slowly in humid air, generating HCl — keep containers dry and sealed; corrosion of unlined metal closures is a known failure mode.
l Shelf life. With correct inhibitor and cold storage, typical commercial shelf life is 3–6 months for high-purity grades; re-test by GC before use after extended storage.
8. Safety and Handling
|
Benzylic chlorides are corrosive alkylating agents. They cause severe skin burns and eye damage and are harmful if inhaled. Handle only in a functioning fume hood. This section is general guidance and does not replace the supplier's SDS, which must be read before first use. |
l Engineering controls: Fume hood or closed handling; avoid vapor inhalation (pungent, lachrymatory).
l PPE: Chemical-resistant gloves (e.g., laminate film or thick nitrile per SDS), splash goggles, lab coat; face shield for decanting bulk quantities.
l First aid: Skin — remove contaminated clothing, wash 15 min, seek medical advice; eyes — irrigate immediately and urgently; inhalation — move to fresh air.
l Spill & fire: Absorb with inert material; combustible liquid (flash point 87 °C) — use dry chemical, CO₂, or alcohol-resistant foam. Polymerized residue in containers should be treated as reactive waste.
l Waste: Dispose via licensed hazardous-waste channels in accordance with local regulations (e.g., corrosive/halogenated organic waste streams).
9. Procurement Checklist for Buyers
1. Confirm the isomer identity — many "vinylbenzyl chloride" listings are m/p mixtures (different CAS numbers). For the ortho isomer, insist on CAS 22570-84-9 and isomer purity by GC.
2. Ask for the TBC content and remaining shelf life, and how the batch was shipped (cold chain).
3. Verify electronic-grade requirements (metal impurities <20 ppb, packaging, COA scope) if used for resists or semiconductors.
4. Check regulatory coverage — EINECS 245-092-5 listing, REACH status, and dangerous-goods classification for international shipping.
5. Plan cold-chain receiving: the material should go straight into refrigerated storage on arrival.
10. Frequently Asked Questions
What is the CAS number and molecular formula of 1-(chloromethyl)-2-vinylbenzene?
CAS 22570-84-9; formula C9H9Cl; MW 152.62 g/mol; InChIKey KKLSEIIDJBCSRK-UHFFFAOYSA-N; EINECS 245-092-5.
How should I store it to prevent polymerization?
Cold (2–9 °C typical), dark, tightly sealed, with the TBC inhibitor left in place and oxygen present. Re-test by GC if stored beyond the stated shelf life.
Is the ortho isomer the same as commercial "vinylbenzyl chloride"?
No. Industrial vinylbenzyl chloride is predominantly a meta/para mixture; the pure ortho isomer is a specialty material with distinct steric and reactivity behavior, usually produced in smaller, controlled batches.
Can I remove the TBC inhibitor before polymerization?
Yes — commonly by passing through basic alumina immediately before use — but the de-inhibited monomer must be used promptly and never stored uninhibited.
What purity grades are available?
Typical R&D grades are ≥97–98% (GC). Electronic-grade material with custom metal impurity specifications (e.g., <20 ppb) can be arranged with specialist suppliers. Packaging ranges from 10 mg R&D units to bulk drums.
